You must have Flash Player installed in order to see this player.
Your Cart is currently empty.
Opinion of Airkewld CEO about:
Pete, I just wanted to thank you for spending so much time with me on the phone this morning. You went out of you way to explain the process to me and I really appreciate that. I can tell you take a lot of pride in what you do. The information was very helpful and I look forward to putting an Airkewld beam on my wagon. Thanks again for your time and have a good one, Reggie
Your cart is empty
We have 43 guests and 1 member online
- Biskut
Suspension
Having trouble with your suspension set up? Ask the pro's! We can guide you with the proper parts and creat a plan that will give you the best possible bang for YOUR buck. Decisions like, "which narrowed beam would work best for me?" or "do I need both drop spindles and a narrowed beam? can be answered with out issue. Welcome to Airkewld. Welcome to the next level.
SKU: ARK-001
Complete front & rear Air Ride Kit for the 1949-1979 Standard Beetle, Ghia & Thing *Beams as of 3/10 can take up to 6-8 weeks to build*
[Product Details...]
Complete front & rear Air Ride Kit for the 1949-1979 Standard Beetle, Ghia & Thing *Beams as of 3/10 can take up to 6-8 weeks to build*
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-002
This kit will fit 1955-1967 Type 2 Bus, Panel, Kombi and Camper Van.
[Product Details...]
This kit will fit 1955-1967 Type 2 Bus, Panel, Kombi and Camper Van.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-004
Made & designed in the USA. This kit fits all 1949-1965 Beetle's and Ghia's. Welding is required with this kit if you do not get the beam. *Beams as of 3/10 can take up to 6-8 weeks to build*
[Product Details...]
Made & designed in the USA. This kit fits all 1949-1965 Beetle's and Ghia's. Welding is required with this kit if you do not get the beam. *Beams as of 3/10 can take up to 6-8 weeks to build*
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-005
*Most parts are made & Designed in the USA* Recommendations-3" narrowed with 15"" wheels or 4" with 17", drop spindles and 2 valve AMS. *Beams as of 3/10 can take up to 6-8 weeks to build*
[Product Details...]
*Most parts are made & Designed in the USA* Recommendations-3" narrowed with 15"" wheels or 4" with 17", drop spindles and 2 valve AMS. *Beams as of 3/10 can take up to 6-8 weeks to build*
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-007
This fits 1955-1967 Type 2 Bus, Kombi, Panel and Camper Vans. This kit is made in the USA and will give you the best possible ride for your Bus.
[Product Details...]
This fits 1955-1967 Type 2 Bus, Kombi, Panel and Camper Vans. This kit is made in the USA and will give you the best possible ride for your Bus.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-008
*Designed & Made in the USA* This kit fits 1949-1965 Standard Beetle's and Ghia's only. This kit requires welding.
[Product Details...]
*Designed & Made in the USA* This kit fits 1949-1965 Standard Beetle's and Ghia's only. This kit requires welding.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-009
*Made & Designed in the USA* Fits 1969-1979 Standard and Super Beetle's, Ghia's and Things. Recommendations-2 valve AMS
[Product Details...]
*Made & Designed in the USA* Fits 1969-1979 Standard and Super Beetle's, Ghia's and Things. Recommendations-2 valve AMS
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-010
*Made & Designed in the USA* Fits 1955-1967 type 2 Bus, Kombi, Panel or Camper van.
[Product Details...]
*Made & Designed in the USA* Fits 1955-1967 type 2 Bus, Kombi, Panel or Camper van.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-001
*Designed in the USA* These shocks will fit 1966-1979 Standard Beetle's, Ghia's & Thing's but it is possible that the shocks will rub the upper control arms. You will need to surface the arms so that they do not touch.
[Product Details...]
*Designed in the USA* These shocks will fit 1966-1979 Standard Beetle's, Ghia's & Thing's but it is possible that the shocks will rub the upper control arms. You will need to surface the arms so that they do not touch.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-002
*Designed in the USA* These Air sleeve shocks fit 1949-1965 Standard Beetle and Ghia only.. They will not work on the rear of an Air cooled VW.
[Product Details...]
*Designed in the USA* These Air sleeve shocks fit 1949-1965 Standard Beetle and Ghia only.. They will not work on the rear of an Air cooled VW.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-003
*Made & Designed in the USA* Perfect for the guy who is a fabricator and install air ride himself.
[Product Details...]
*Made & Designed in the USA* Perfect for the guy who is a fabricator and install air ride himself.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-004
Made in the USA - Will easily fit all air cooled VW's. Can be cut to length to fit up to 6" narrowed.
[Product Details...]
Made in the USA - Will easily fit all air cooled VW's. Can be cut to length to fit up to 6" narrowed.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-005
*Made & Designed in the USA* Welding is needed. Fits 1949-1965 Beetle's and Ghia's. Allows for the installation of Air Sleeve shocks and having more travel. Recommended for the do-it-your-self-er.
[Product Details...]
*Made & Designed in the USA* Welding is needed. Fits 1949-1965 Beetle's and Ghia's. Allows for the installation of Air Sleeve shocks and having more travel. Recommended for the do-it-your-self-er.
Average customer rating:
Total votes: 0
Total votes: 0 Link Pin Lower Shock Relocaters
SKU: ARP-006
Fits 1949-1965 Beetle's & Ghia's. Welding is needed. Recommended to anyone who wants to make their VW handle better.
[Product Details...]
Fits 1949-1965 Beetle's & Ghia's. Welding is needed. Recommended to anyone who wants to make their VW handle better.
Average customer rating:
Total votes: 1
Total votes: 1 Swing Axle Air Ride Bracket Kit
SKU: ARP-014
This kit will fit 1949-1968 Beetles and Ghias. It is only the brackets with hardware only, no bags, no shocks, no templates etc. It is also a weld on version.
[Product Details...]
This kit will fit 1949-1968 Beetles and Ghias. It is only the brackets with hardware only, no bags, no shocks, no templates etc. It is also a weld on version.
Average customer rating:
Total votes: 0
Total votes: 0 1954-1965 Complete Lowering Kit
SKU: CLK-001
*Made and Designed in the USA* This will fit 1949-1965 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop. *Beams as of 3/10 can take up to 6-8 weeks to build*
[Product Details...]
*Made and Designed in the USA* This will fit 1949-1965 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop. *Beams as of 3/10 can take up to 6-8 weeks to build*
Average customer rating:
Total votes: 0
Total votes: 0 1966-1968 Complete Lowering Kit
SKU: CLK-002
*Made and Designed in the USA* This will fit 1966-1968 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop. *Beams as of 3/10 can take up to 6-8 weeks to build*
[Product Details...]
*Made and Designed in the USA* This will fit 1966-1968 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop. *Beams as of 3/10 can take up to 6-8 weeks to build*
Average customer rating:
Total votes: 0
Total votes: 0 1969-1979 Complete Lowering Kit
SKU: CLK-003
*Made and Designed in the USA* This will fit 1969-1979 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop. *Beams as of 3/10 can take up to 6-8 weeks to build*
[Product Details...]
*Made and Designed in the USA* This will fit 1969-1979 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop. *Beams as of 3/10 can take up to 6-8 weeks to build*
Average customer rating:
Total votes: 0
Total votes: 0 1971-1973 Complete Lowering Kit
SKU: CLK-004
Made and Designed in the USA - Fits 1971-1973 Super Beetle's only. Drop your Super from 1" - 6" with this kit.
[Product Details...]
Made and Designed in the USA - Fits 1971-1973 Super Beetle's only. Drop your Super from 1" - 6" with this kit.
Average customer rating:
Total votes: 0
Total votes: 0 1974-1979 Complete Lowering Kit
SKU: CLK-005
Made and Designed in the USA - Fits 1974-1979 Super Beetle's only. Drop your Super from 1" - 6" with this kit.
[Product Details...]
Made and Designed in the USA - Fits 1974-1979 Super Beetle's only. Drop your Super from 1" - 6" with this kit.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: CLK-006
Fits 1955-1967 type 2 Bus, Kombi, Panel or Camper van. This kit will complete a 3.5" drop up front and 4" in the rear. You will need to have a trans specialist install axles and flip the ring gear.
[Product Details...]
Fits 1955-1967 type 2 Bus, Kombi, Panel or Camper van. This kit will complete a 3.5" drop up front and 4" in the rear. You will need to have a trans specialist install axles and flip the ring gear.
Average customer rating:
Total votes: 0
Total votes: 0 Type 181 Thing Complete Lowering Kit
SKU: CLK-007
*Built to order* Fits Type 181 Thing Narrowed Beam, Torsion Springs, Tie rods, Upper & Lower Control Arms, Excentrics, Drop Spindles, Lowered Ball Joints, Lowered Shocks Front & Rear
[Product Details...]
*Built to order* Fits Type 181 Thing Narrowed Beam, Torsion Springs, Tie rods, Upper & Lower Control Arms, Excentrics, Drop Spindles, Lowered Ball Joints, Lowered Shocks Front & Rear
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: CLK-008
Pre-order - Deposit Only - This will fit all Type 3's. This kit will come with a 4" Ultimate Narrowed Ball Joint Type 1 Beam, torsions, tie rods, Drop Spindles, Upper & Lower Control Arms, Eccentrics, Lowered ball joints, front and rear shocks.
[Product Details...]
Pre-order - Deposit Only - This will fit all Type 3's. This kit will come with a 4" Ultimate Narrowed Ball Joint Type 1 Beam, torsions, tie rods, Drop Spindles, Upper & Lower Control Arms, Eccentrics, Lowered ball joints, front and rear shocks.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: DSB-001
*Designed in the USA* Fits all years of Super Beetles.
[Product Details...]
*Designed in the USA* Fits all years of Super Beetles.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: DSB-002
Made and Designed in the USA - Fits Super Beetle's only. Drop your Super from 1-6" with this kit.
[Product Details...]
Made and Designed in the USA - Fits Super Beetle's only. Drop your Super from 1-6" with this kit.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: DT1-001
*Designed in the USA* They give you a 2.5" drop. These spindles will work with all your factory bearings and tie rods. 1949-1965 beetle's and ghia's.
[Product Details...]
*Designed in the USA* They give you a 2.5" drop. These spindles will work with all your factory bearings and tie rods. 1949-1965 beetle's and ghia's.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: DT1-002
*Designed in the USA* These spindles will drop your 1949-1965 beetle and Ghia 2.5", add 3/8" of track to each side and you will need to use Ball joint style rotors for these to work.
[Product Details...]
*Designed in the USA* These spindles will drop your 1949-1965 beetle and Ghia 2.5", add 3/8" of track to each side and you will need to use Ball joint style rotors for these to work.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: DT1-003
*Designed in the USA* These forged spindles will fit 1966-1979 Standard Beetle's and Ghia's. For 66-68 Models you will need inner Bearings and Outer tie rod ends.
[Product Details...]
*Designed in the USA* These forged spindles will fit 1966-1979 Standard Beetle's and Ghia's. For 66-68 Models you will need inner Bearings and Outer tie rod ends.
Average customer rating:
Total votes: 1
Total votes: 1 
SKU: DT1-004
*Designed in the USA* These forged spindles will fit 1966-1979 Standard Beetle's & Ghia's. For 66-68 Models you will need inner Bearings & Outer tie rod ends.
[Product Details...]
*Designed in the USA* These forged spindles will fit 1966-1979 Standard Beetle's & Ghia's. For 66-68 Models you will need inner Bearings & Outer tie rod ends.
Average customer rating:
Total votes: 1
Total votes: 1 
SKU: DT1-005
* Designed in the USA* Complete set of uppers and lowers for 1966-1979 Standard Beetle's and Ghia's. These ball joints will give you 3" on average of additional travel if properly installed.
[Product Details...]
* Designed in the USA* Complete set of uppers and lowers for 1966-1979 Standard Beetle's and Ghia's. These ball joints will give you 3" on average of additional travel if properly installed.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: DT2-001
As of this time, no one make new drop spindles. So we provide the service of dropping them for you. We pick them up, and ship them back to you good as new, 3.5" lower and in "like new" condition.
[Product Details...]
As of this time, no one make new drop spindles. So we provide the service of dropping them for you. We pick them up, and ship them back to you good as new, 3.5" lower and in "like new" condition.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: DT2-002
This fits 1955-1967 Type 2 Bus, Panel, Kombi & Camper van. A trans specialist will be needed to flip the ring gear and install the new tubes. You will need OEM axles to go along with this.
[Product Details...]
This fits 1955-1967 Type 2 Bus, Panel, Kombi & Camper van. A trans specialist will be needed to flip the ring gear and install the new tubes. You will need OEM axles to go along with this.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: DT2-003
These are used to lower the rear of your ‘68-’79 Bay 3.25″ while still maintaining stock camber. All without having to notch your spring plates or pushing the rear wheel out (Maintains stock track width).
[Product Details...]
These are used to lower the rear of your ‘68-’79 Bay 3.25″ while still maintaining stock camber. All without having to notch your spring plates or pushing the rear wheel out (Maintains stock track width).
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-001
*Made & Designed in the USA * Fits 1949-1965 Beetle's and Ghia's. These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods. Pictures are just for reference.
[Product Details...]
*Made & Designed in the USA * Fits 1949-1965 Beetle's and Ghia's. These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods. Pictures are just for reference.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-002
*Made & Designed in the USA* These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods.
[Product Details...]
*Made & Designed in the USA* These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods.
Average customer rating:
Total votes: 0
Total votes: 0 Link Pin Front end side plates
SKU: FEP-003
*Made and Designed in the USA* You will need 2 per beam. These will fit 1949-1965 link pin front ends for a Beetle or ghia.
[Product Details...]
*Made and Designed in the USA* You will need 2 per beam. These will fit 1949-1965 link pin front ends for a Beetle or ghia.
Average customer rating:
Total votes: 0
Total votes: 0 Ball Joint Front End Side Plates
SKU: FEP-004
*Made and Designed in the USA* These will fit 1966-1974 standard Beetle and Ghia front ends that want to have a narrowed 4"- 8" beam.
[Product Details...]
*Made and Designed in the USA* These will fit 1966-1974 standard Beetle and Ghia front ends that want to have a narrowed 4"- 8" beam.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-005
*Made and Designed in the USA* These will fit all Link Pin Applications.
[Product Details...]
*Made and Designed in the USA* These will fit all Link Pin Applications.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-006
*Made and Designed in the USA* These will fit all Ball joint Applications.
[Product Details...]
*Made and Designed in the USA* These will fit all Ball joint Applications.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-007
Ball joint shock towers designed to use 2" DOM .120 wall upper tube and 2.250" DOM .120 wall lower tube.
[Product Details...]
Ball joint shock towers designed to use 2" DOM .120 wall upper tube and 2.250" DOM .120 wall lower tube.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-008
Link Pin shock towers designed to use 2" DOM .120 wall upper and lower tubes. 3/16 Laser cut steel
[Product Details...]
Link Pin shock towers designed to use 2" DOM .120 wall upper and lower tubes. 3/16 Laser cut steel
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-009
100% made in the USA Adjusters come with everything that you will need to install adjusters in your beam. Don't trust imported parts to do the job right.
[Product Details...]
100% made in the USA Adjusters come with everything that you will need to install adjusters in your beam. Don't trust imported parts to do the job right.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-010
Steering dampener bracket will work on any type 1 and type 181 front end. LHD or RHD.
[Product Details...]
Steering dampener bracket will work on any type 1 and type 181 front end. LHD or RHD.
Average customer rating:
Total votes: 0
Total votes: 0 Delrin Bushing Set for Narrowed Beams
SKU: FEP-011
Nothing is better than Delrin Bushings in a VW beam. Nothing to wear out, nothing to groove the control arms, the best bang period. These bushings will only fit 2" .120 wall DOM and 2.250" .120 wall DOM
[Product Details...]
Nothing is better than Delrin Bushings in a VW beam. Nothing to wear out, nothing to groove the control arms, the best bang period. These bushings will only fit 2" .120 wall DOM and 2.250" .120 wall DOM
Average customer rating:
Total votes: 0
Total votes: 0 2 Inch DOM Tubes for Narrowed Front ends
SKU: FEP-012
2.00" DOM .120 wall tubing that is laser cut to length with slot for adjuster already cut into it. We have them available for most size narrowed beams
[Product Details...]
2.00" DOM .120 wall tubing that is laser cut to length with slot for adjuster already cut into it. We have them available for most size narrowed beams
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-013
These seals replace the factory grease seals with poly urethane red versions. These fit 1966-1979 Standard Beetle's, Ghia's and Thing's.
[Product Details...]
These seals replace the factory grease seals with poly urethane red versions. These fit 1966-1979 Standard Beetle's, Ghia's and Thing's.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-014
These seals replace the factory grease seals with poly urethane red versions. These seals fit 1949-1965 Beetle's & Ghia's.
[Product Details...]
These seals replace the factory grease seals with poly urethane red versions. These seals fit 1949-1965 Beetle's & Ghia's.
Average customer rating:
Total votes: 0
Total votes: 0 The Ultimate Narrowed and Adjustable Front Beam
SKU: NFE-001
*Made and Designed in the USA* Narrowed from 2" to 5" with no body mods. This Ultimate beam can fit Standard Beetle's, Ghia's and Thing's. 100% brand new beams made from scratch to your spec's. *Beams as of 3/10 can take up to 6-8 weeks to build*
[Product Details...]
*Made and Designed in the USA* Narrowed from 2" to 5" with no body mods. This Ultimate beam can fit Standard Beetle's, Ghia's and Thing's. 100% brand new beams made from scratch to your spec's. *Beams as of 3/10 can take up to 6-8 weeks to build*
Average customer rating:
Total votes: 1
Total votes: 1 The Ultimate Narrowed Shockless Beam
SKU: NFE-002
*Made and Designed in the USA* Narrowed from 5" to 8" with no body mods. This Ultimate beam can fit Standard Beetle's, Ghia's and Thing's. 100% brand new beams made from scratch to your Spec's. *Beams as of 3/10 can take up to 6-8 weeks to build*
[Product Details...]
*Made and Designed in the USA* Narrowed from 5" to 8" with no body mods. This Ultimate beam can fit Standard Beetle's, Ghia's and Thing's. 100% brand new beams made from scratch to your Spec's. *Beams as of 3/10 can take up to 6-8 weeks to build*
Average customer rating:
Total votes: 1
Total votes: 1 
SKU: SHX-001
*Designed in the USA* These shocks come in loop to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.
[Product Details...]
*Designed in the USA* These shocks come in loop to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: SHX-002
*Designed in the USA* These shocks come in stem to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.
[Product Details...]
*Designed in the USA* These shocks come in stem to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: SHX-003
*Designed in the USA* These shocks come in loop to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.
[Product Details...]
*Designed in the USA* These shocks come in loop to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: SHX-004
*Designed in the USA* These shocks come in loop to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.
[Product Details...]
*Designed in the USA* These shocks come in loop to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.
Average customer rating:
Total votes: 0
Total votes: 0 - «« Start
- « Prev
- 1
- Next »
- End »»
Results 1 - 53 of 53
Featured Products
1954-1965 Complete Lowering Kit
$850.00
*Made and Designed in the USA* This will fit 1949-1965 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop. *Beams as of 3/10 can take up to 6-8 weeks to build*
Check these out!
Sniper Steering Wheel
$225.00
|
I-Force Wheel Set
$2,350.00
|
The Latest Offerings
|
Swing Axle Air Ride Bracket Kit
$515.00
|
Steel Brake Line Kit - Stainless
$119.95
|
Torsion Dimple Bit
$38.25
|
© Airkewld.com - All Rights ReservedAirkewld PO Box 8030 Surprise, AZ 85374 Phone (623) 518-3537