Airkewld Store : Custom Volkswagen Parts

SKU: ARK-001
Complete front & rear Air Ride Kit for the 1949-1979 Standard Beetle, Ghia & Thing

Average customer rating:
  Total votes: 1

SKU: CLK-001
*Made and Designed in the USA* This will fit 1949-1965 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop.

Average customer rating:
  Total votes: 0

SKU: CLK-002
*Made and Designed in the USA* This will fit 1966-1968 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop.

Average customer rating:
  Total votes: 0

SKU: CLK-003
*Made and Designed in the USA* This will fit 1969-1979 Beetles and Ghias. It will lower the vehicle from 2.5" to 7" of drop.

Average customer rating:
  Total votes: 0

SKU: NFE-001
*Made and Designed in the USA* Narrowed from 2" to 5" with no body mods. This Ultimate beam can fit Standard Beetle's, Ghia's and Thing's. 100% brand new beams made from scratch to your spec's.

Average customer rating:
  Total votes: 1

SKU: NFE-002
*Made and Designed in the USA* Narrowed from 5" to 8" with no body mods. This Ultimate beam can fit Standard Beetle's, Ghia's and Thing's. 100% brand new beams made from scratch to your Spec's.

Average customer rating:
  Total votes: 1

SKU: ARK-008
*Designed & Made in the USA* This kit fits 1949-1965 Standard Beetle's and Ghia's only. This kit requires welding.

Average customer rating:
  Total votes: 0

SKU: ARK-009
*Made & Designed in the USA* Fits 1969-1979 Standard and Super Beetle's, Ghia's and Things. Recommendations-2 valve AMS

Average customer rating:
  Total votes: 0

SKU: ARK-005
*Most parts are made & Designed in the USA* Recommendations-3" narrowed with 15"" wheels or 4" with 17", drop spindles and 2 valve AMS.

Average customer rating:
  Total votes: 0

SKU: ARK-004
Made & designed in the USA. This kit fits all 1949-1965 Beetle's and Ghia's. Welding is required with this kit if you do not get the beam.

Average customer rating:
  Total votes: 0

SKU: DT1-001
*Designed in the USA* They give you a 2.5" drop. These spindles will work with all your factory bearings and tie rods. 1949-1965 beetle's and ghia's.

Average customer rating:
  Total votes: 0

SKU: DT1-002
*Designed in the USA* These spindles will drop your 1949-1965 beetle and Ghia 2.5", add 3/8" of track to each side and you will need to use Ball joint style rotors for these to work.

Average customer rating:
  Total votes: 0

SKU: DT1-003
*Designed in the USA* These forged spindles will fit 1966-1979 Standard Beetle's and Ghia's. For 66-68 Models you will need inner Bearings and Outer tie rod ends.

Average customer rating:
  Total votes: 1

SKU: DT1-004
*Designed in the USA* These forged spindles will fit 1966-1979 Standard Beetle's & Ghia's. For 66-68 Models you will need inner Bearings & Outer tie rod ends.

Average customer rating:
  Total votes: 1

SKU: ARP-004
Made in the USA - Will easily fit all air cooled VW's. Can be cut to length to fit up to 6" narrowed.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: ARP-001
*Designed in the USA* These shocks will fit 1966-1979 Standard Beetle's, Ghia's & Thing's but it is possible that the shocks will rub the upper control arms. You will need to surface the arms so that they do not touch.

Average customer rating:
  Total votes: 0

SKU: ARP-002
*Designed in the USA* These Air sleeve shocks fit 1949-1965 Standard Beetle and Ghia only.. They will not work on the rear of an Air cooled VW.

Average customer rating:
  Total votes: 0

SKU: ARP-006
Fits 1949-1965 Beetle's & Ghia's. Welding is needed. Recommended to anyone who wants to make their VW handle better.

Average customer rating:
  Total votes: 1

Quantity: 

SKU: ARP-005
*Made & Designed in the USA* Welding is needed. Fits 1949-1965 Beetle's and Ghia's. Allows for the installation of Air Sleeve shocks and having more travel. Recommended for the do-it-your-self-er.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: SHX-004
*Designed in the USA* These shocks come in loop to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: SHX-003
*Designed in the USA* These shocks come in loop to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: SHX-002
*Designed in the USA* These shocks come in stem to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: SHX-001
*Designed in the USA* These shocks come in loop to loop application. We can send a standard length application set of shock to you or you can let us know what the distance from shock mount to shock mount at drive height and we will build a set for you.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-013
These seals replace the factory grease seals with poly urethane red versions. These fit 1966-1979 Standard Beetle's, Ghia's and Thing's.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-014
These seals replace the factory grease seals with poly urethane red versions. These seals fit 1949-1965 Beetle's & Ghia's.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: DT1-005
* Designed in the USA* Complete set of uppers and lowers for 1966-1979 Standard Beetle's and Ghia's. These ball joints will give you 3" on average of additional travel if properly installed.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-005
*Made and Designed in the USA* These will fit all Link Pin Applications.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-006
*Made and Designed in the USA* These will fit all Ball joint Applications.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-004
*Made and Designed in the USA* These will fit 1966-1974 standard Beetle and Ghia front ends that want to have a narrowed 4"- 8" beam.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-003
*Made and Designed in the USA* These will fit 1949-1965 link pin front ends for a Beetle or ghia.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-001
*Made & Designed in the USA * Fits 1949-1965 Beetle's and Ghia's. These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods. Pictures are just for reference.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-002
*Made & Designed in the USA* These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-012
2.00" DOM .120 wall tubing that is laser cut to length with slot for adjuster already cut into it. We have them available for most size narrowed beams

Average customer rating:
  Total votes: 0

SKU: FEP-007
Ball joint shock towers designed to use 2" DOM .120 wall upper tube and 2.250" DOM .120 wall lower tube.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-011
Nothing is better than Delrin Bushings in a VW beam. Nothing to wear out, nothing to groove the control arms, the best bang period. These bushings will only fit 2" .120 wall DOM and 2.250" .120 wall DOM

Average customer rating:
  Total votes: 0

SKU: FEP-008
Link Pin shock towers designed to use 2" DOM .120 wall upper and lower tubes. 3/16 Laser cut steel

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-010
Steering dampener bracket will work on any type 1 and type 181 front end. LHD or RHD.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-009
100% made in the USA Adjusters come with everything that you will need to install adjusters in your beam. Don't trust imported parts to do the job right.

Average customer rating:
  Total votes: 0

SKU: ARP-014
This kit will fit 1949-1968 Beetles and Ghias. It is only the brackets with hardware only, no bags, no shocks, no templates etc. It is also a weld on version.

Average customer rating:
  Total votes: 0

Quantity: 

SKU: FEP-015
Narrowed Torsion Leaf set for the Type 1 Beetle and Ghia. We have them available for Ball Joint and Link Pin application in any narrowed width. Made in the USA

Average customer rating:
  Total votes: 0