Your Cart is currently empty.
We have 49 guests online
Miscellaneous
|
|
|
SKU: INT-013
Dress up your interior with this clean steering column gauge mount. No extra holes needed to drill. Simply use the existing mounting holes for installation. Available in machined or polished finishes.
[Product Details...]
Dress up your interior with this clean steering column gauge mount. No extra holes needed to drill. Simply use the existing mounting holes for installation. Available in machined or polished finishes.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-011
System contains the following: 2 gallon tank, 2x 30 foot rolls of 1/4" line, 1 set of 2 manual toggle valves with double needle air gauge, PSI switch with harness and relay, Viair 280c Air Compressor and a fitting pack.
[Product Details...]
System contains the following: 2 gallon tank, 2x 30 foot rolls of 1/4" line, 1 set of 2 manual toggle valves with double needle air gauge, PSI switch with harness and relay, Viair 280c Air Compressor and a fitting pack.
Average customer rating:
Total votes: 0
Total votes: 0 2 Valve Electric Air Management System
SKU: ARK-012
System contains the following: 2 gallon tank, 1x 50 foot roll of 1/4" line, 1 20 foot roll of 1/8" line, 1 set of 2 electrical switches, 1, 4 way valve, 1 dual needle air gauge, PSI switch with harness and relay, Viair 280c Air Compressor and a fitting pa
[Product Details...]
System contains the following: 2 gallon tank, 1x 50 foot roll of 1/4" line, 1 20 foot roll of 1/8" line, 1 set of 2 electrical switches, 1, 4 way valve, 1 dual needle air gauge, PSI switch with harness and relay, Viair 280c Air Compressor and a fitting pa
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-013
System contains the following: 2 gallon tank, 4x 30 foot rolls of 1/4" line, 2 sets of 2 manual toggle valves with double needle air gauge, PSI switch with harness and relay, Viair 280c Air Compressor and a fitting pack.
[Product Details...]
System contains the following: 2 gallon tank, 4x 30 foot rolls of 1/4" line, 2 sets of 2 manual toggle valves with double needle air gauge, PSI switch with harness and relay, Viair 280c Air Compressor and a fitting pack.
Average customer rating:
Total votes: 0
Total votes: 0 4 Valve Electric Air Management System
SKU: ARK-014
*Most parts are made & Designed in the USA*
[Product Details...]
*Most parts are made & Designed in the USA*
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-007
*Made & Designed in the Germany*. Continental 1/2 port 2 bellow bags 2500lbs
[Product Details...]
*Made & Designed in the Germany*. Continental 1/2 port 2 bellow bags 2500lbs
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-008
*Made and Designed in the USA* These fittings were designed for our shocks and it is possible that they might work on other brands but we can not guarantee it.
[Product Details...]
*Made and Designed in the USA* These fittings were designed for our shocks and it is possible that they might work on other brands but we can not guarantee it.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-002
*Designed in the USA* These Air sleeve shocks fit 1949-1965 Standard Beetle and Ghia only.. They will not work on the rear of an Air cooled VW.
[Product Details...]
*Designed in the USA* These Air sleeve shocks fit 1949-1965 Standard Beetle and Ghia only.. They will not work on the rear of an Air cooled VW.
Average customer rating:
Total votes: 0
Total votes: 0 Manual Valve W/ Dual Needle Gauge
SKU: ARP-009
*Made and Designed in the USA* Only works with 1/4"lines and goes up to 200PSI
[Product Details...]
*Made and Designed in the USA* Only works with 1/4"lines and goes up to 200PSI
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-004
Made in the USA - Will easily fit all air cooled VW's. Can be cut to length to fit up to 6" narrowed.
[Product Details...]
Made in the USA - Will easily fit all air cooled VW's. Can be cut to length to fit up to 6" narrowed.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-010
*Designed in the USA* VIAIR 280C is a great all around compressor that works great with the Air Cooled VW. This compressor will not bog down the charging system like larger models will.
[Product Details...]
*Designed in the USA* VIAIR 280C is a great all around compressor that works great with the Air Cooled VW. This compressor will not bog down the charging system like larger models will.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-011
*Made and Designed in the USA*can work with both Ball joint type 1 application and type 2 Bus applications. Some type 2's will need to open up the center of them to slide on due to large races on the arms.
[Product Details...]
*Made and Designed in the USA*can work with both Ball joint type 1 application and type 2 Bus applications. Some type 2's will need to open up the center of them to slide on due to large races on the arms.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-003
*Made & Designed in the USA* Perfect for the guy who is a fabricator and install air ride himself. For the month of April, $200 off of normal price
[Product Details...]
*Made & Designed in the USA* Perfect for the guy who is a fabricator and install air ride himself. For the month of April, $200 off of normal price
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-012
*Made & Designed in the USA*. This adjustable PSI Switch will adjust from 120PSI to 400 PSI. So in effect you can adjust your pressure to be real quick or just average.
[Product Details...]
*Made & Designed in the USA*. This adjustable PSI Switch will adjust from 120PSI to 400 PSI. So in effect you can adjust your pressure to be real quick or just average.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-013
*Made and Designed in the USA* Perfect for the Air Cooled VW application
[Product Details...]
*Made and Designed in the USA* Perfect for the Air Cooled VW application
Average customer rating:
Total votes: 0
Total votes: 0 2 Inch DOM Tubes for Narrowed Front ends
SKU: FEP-012
2.00" DOM .120 wall tubing that is laser cut to length with slot for adjuster already cut into it. We have them available for most size narrowed beams
[Product Details...]
2.00" DOM .120 wall tubing that is laser cut to length with slot for adjuster already cut into it. We have them available for most size narrowed beams
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-007
Ball joint shock towers designed to use 2" DOM .120 wall upper tube and 2.250" DOM .120 wall lower tube.
[Product Details...]
Ball joint shock towers designed to use 2" DOM .120 wall upper tube and 2.250" DOM .120 wall lower tube.
Average customer rating:
Total votes: 0
Total votes: 0 Delrin Bushing Set for Narrowed Beams
SKU: FEP-011
Nothing is better than Delrin Bushings in a VW beam. Nothing to wear out, nothing to groove the control arms, the best bang period. These bushings will only fit 2" .120 wall DOM and 2.250" .120 wall DOM
[Product Details...]
Nothing is better than Delrin Bushings in a VW beam. Nothing to wear out, nothing to groove the control arms, the best bang period. These bushings will only fit 2" .120 wall DOM and 2.250" .120 wall DOM
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-008
Link Pin shock towers designed to use 2" DOM .120 wall upper and lower tubes. 3/16 Laser cut steel
[Product Details...]
Link Pin shock towers designed to use 2" DOM .120 wall upper and lower tubes. 3/16 Laser cut steel
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-010
Steering dampener bracket will work on any type 1 and type 181 front end. LHD or RHD.
[Product Details...]
Steering dampener bracket will work on any type 1 and type 181 front end. LHD or RHD.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-009
100% made in the USA Adjusters come with everything that you will need to install adjusters in your beam. Don't trust imported parts to do the job right.
[Product Details...]
100% made in the USA Adjusters come with everything that you will need to install adjusters in your beam. Don't trust imported parts to do the job right.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: MIS-004
This high speed bit will make dimpling your narrowed torsions a breeze. 27445A13
[Product Details...]
This high speed bit will make dimpling your narrowed torsions a breeze. 27445A13
Average customer rating:
Total votes: 0
Total votes: 0 Swing Axle Air Ride Bracket Kit
SKU: ARP-014
This kit will fit 1949-1968 Beetles and Ghias. It is only the brackets with hardware only, no bags, no shocks, no templates etc. It is also a weld on version.
[Product Details...]
This kit will fit 1949-1968 Beetles and Ghias. It is only the brackets with hardware only, no bags, no shocks, no templates etc. It is also a weld on version.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-015
Narrowed Torsion Leaf set for the Type 1 Beetle and Ghia. We have them available for Ball Joint and Link Pin application in any narrowed width. Made in the USA
[Product Details...]
Narrowed Torsion Leaf set for the Type 1 Beetle and Ghia. We have them available for Ball Joint and Link Pin application in any narrowed width. Made in the USA
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: DT1-005
* Designed in the USA* Complete set of uppers and lowers for 1966-1979 Standard Beetle's and Ghia's. These ball joints will give you 3" on average of additional travel if properly installed.
[Product Details...]
* Designed in the USA* Complete set of uppers and lowers for 1966-1979 Standard Beetle's and Ghia's. These ball joints will give you 3" on average of additional travel if properly installed.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARP-005
*Made & Designed in the USA* Welding is needed. Fits 1949-1965 Beetle's and Ghia's. Allows for the installation of Air Sleeve shocks and having more travel. Recommended for the do-it-your-self-er.
[Product Details...]
*Made & Designed in the USA* Welding is needed. Fits 1949-1965 Beetle's and Ghia's. Allows for the installation of Air Sleeve shocks and having more travel. Recommended for the do-it-your-self-er.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-014
These seals replace the factory grease seals with poly urethane red versions. These seals fit 1949-1965 Beetle's & Ghia's.
[Product Details...]
These seals replace the factory grease seals with poly urethane red versions. These seals fit 1949-1965 Beetle's & Ghia's.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-001
*Made & Designed in the USA * Fits 1949-1965 Beetle's and Ghia's. These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods. Pictures are just for reference.
[Product Details...]
*Made & Designed in the USA * Fits 1949-1965 Beetle's and Ghia's. These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods. Pictures are just for reference.
Average customer rating:
Total votes: 0
Total votes: 0 Link Pin Lower Shock Relocaters
SKU: ARP-006
Fits 1949-1965 Beetle's & Ghia's. Welding is needed. Recommended to anyone who wants to make their VW handle better.
[Product Details...]
Fits 1949-1965 Beetle's & Ghia's. Welding is needed. Recommended to anyone who wants to make their VW handle better.
Average customer rating:
Total votes: 1
Total votes: 1 Link Pin Front end side plates
SKU: FEP-003
*Made and Designed in the USA* These will fit 1949-1965 link pin front ends for a Beetle or ghia.
[Product Details...]
*Made and Designed in the USA* These will fit 1949-1965 link pin front ends for a Beetle or ghia.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-005
*Made and Designed in the USA* These will fit all Link Pin Applications.
[Product Details...]
*Made and Designed in the USA* These will fit all Link Pin Applications.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-002
*Made & Designed in the USA* These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods.
[Product Details...]
*Made & Designed in the USA* These tie rods will work with up to a 6" narrowed front end. Comes with new jam nuts. Tie rod ends do not come with the tie rods.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: FEP-006
*Made and Designed in the USA* These will fit all Ball joint Applications.
[Product Details...]
*Made and Designed in the USA* These will fit all Ball joint Applications.
Average customer rating:
Total votes: 0
Total votes: 0 
SKU: ARK-009
*Made & Designed in the USA* Fits 1969-1979 Standard and Super Beetle's, Ghia's and Things. Recommendations-2 valve AMS
[Product Details...]
*Made & Designed in the USA* Fits 1969-1979 Standard and Super Beetle's, Ghia's and Things. Recommendations-2 valve AMS
Average customer rating:
Total votes: 0
Total votes: 0 - «« Start
- « Prev
- 1
- Next »
- End »»
Results 1 - 34 of 34
The Latest Offerings
18 inch Forged Billet Fuch Style Wheel Each
$650.00
|
Airkewld Inspection Plate Cover
$15.95
|
Billet Column Gauge Mount
$54.95
|
© Airkewld.com - All Rights ReservedAirkewld PO Box 8030 Surprise, AZ 85374 Phone (623) 518-3537